Pressure washing in Brentwood is for hard surfaces: driveways, walks, patios, and hardscape, and it is deliberately not for everything. Siding, painted surfaces, and anything with a seam get soft washing instead, because high pressure drives water behind the surface and forces it into places it does not dry out of.
Quick answer
Pressure washing uses high-pressure water (~3,000 PSI) to remove dirt, mildew, and stains from durable hard surfaces.
The checklist is the same everywhere. What is on your glass is not. These are the conditions that actually shape this job in Brentwood. Each one is true here and false in plenty of other towns we serve.
Southern California is a stucco region, and this is the single most common way exterior cleaning damages a house here. Stucco is a porous three-coat system designed to breathe and to shed water outward. A pressure wand drives water inward, past the finish coat and into the paper and sheathing behind it, where it has nowhere to go and no dry season short enough to help. The damage does not appear that afternoon. It appears as blistering, spalling and staining months later and gets blamed on the weather. It is worse on period-revival work, where the finish coat is lime-based and softer than modern acrylic. Hardscape takes pressure. Walls take a low-pressure soft wash with the chemistry doing the work. Any company willing to put a pressure wand on your stucco is telling you something about how it will treat the rest of the job.
The instinct is to wash hardscape once the weather turns nice, which in Brentwood means spring. That is backwards. Seven or eight rainless months deposit a continuous film on every horizontal surface, and the first storms of December then wet it, mobilise it, and run it into the low points and along the joints where it sets. Washing in autumn, before the wet season starts, means the rain arrives on clean concrete and the winter actually works in your favor. It is also, practically, the easier booking: nobody else is asking for it in October.
Hard-surface pressure washing: concrete driveways, sidewalks, brick or stone patios, stamped concrete, paver walkways. ~3,000 PSI hot-water pressure removes oil stains, ground-in dirt, and biological growth.
Soft-wash service, for siding, stucco, painted wood, and any surface that won't survive high pressure. ~500 PSI with a biocidal cleaning solution.
Composite/wood deck cleaning, different solution and pressure for each material; we won't blast away the protective finish.
Fence cleaning: wood, vinyl, or composite. Pre-paint prep is a common request.
Garage floor degreasing, hot-water pressure plus an oil-cutting detergent.
Enter your address. Our autoquoter sizes the property and returns a pressure-wash price. We'll confirm the surfaces and any add-ons when scheduling.
Lead tech identifies what's pressure vs. soft-wash, flags any surfaces we won't touch (brick mortar in poor condition, peeling paint), and sets up appropriate plant/landscaping protection.
Surface-appropriate biocide for soft-wash; degreaser for hard-surface oil stains. Dwell time per the chemistry. We don't rush.
Hot-water pressure for hard surfaces. Soft-wash applicator for siding/stucco. Always work top-down to prevent streak lines.
Final low-pressure rinse to remove any remaining solution. Plants/lawn rinsed clean. Photos emailed showing before/after.
Most Brentwood properties land between $585 and $1560 for this service. That band is derived from real Brentwood jobs, not a national average, which is why it differs from the number you would see on our page for a neighboring town. Here is how the job profiles break down:
Want the exact number for your address? Get an instant quote in 30 seconds , no callback and no in-home estimate.
Steep lots and hillside builds where the primary glass faces downslope over nothing level.
Condo and mid-rise stock with balcony rail, plus street-level retail that needs a shorter interval.
Equestrian and rural-feel properties where the address is frequently more than one structure.
Large lots, mature canopy and period architecture with original divided lights. Hand work, and heavy leaf load in the tracks.
Post-and-beam mid-century with big original single-pane lights. No thermal shock, no impact loads, and check the gaskets.
Long canyon with the strongest wind funneling in the area and genuine wildland interface at the upper end.
See every neighborhood and the full local guide on our Brentwood window cleaning page.
Colorado's freeze-thaw cycles work biological growth (algae, mildew) deep into porous surfaces like concrete and brick. Annual pressure washing is the practical maintenance interval; longer than that and you start losing surface integrity.
Front Range water hardness leaves mineral deposits on hardscape that look like permanent staining. Hot-water pressure with a mild acidic surfactant clears these where cold-water blasting won't.
Hail country (Boulder, Fort Collins, Loveland), after major hail, dimpled siding and damaged shingles drop debris on patios that's easier to remove pressure-washed than left to weather.
We will clean it, but not with pressure. Stucco and adobe are porous, and a pressure washer drives water into the wall where it causes blistering, spalling, and staining months later. Those surfaces get a low-pressure soft wash where the cleaning solution does the work. We reserve actual pressure for driveways, walks, and hardscape.
Autumn, before the rain starts. That is the opposite of what most people assume. Brentwood gets almost all of its rain between December and March, and the seven or eight dry months before it leave a continuous film on every horizontal surface. Washing in October means the first storms land on clean concrete instead of mobilising a season of accumulated grime into the joints and low spots. Spring is the second-best window and it is fine, it is simply cleaning up damage that an autumn wash would have prevented.
Most Denver homes run $300–$800. A typical driveway + sidewalk + porch combo is $300–$450. Full house siding (soft-wash) is $400–$700. Whole-property bundles (driveway + house + deck + fence) run $700–$1,500.
Pressure washing is high-pressure water (~3,000 PSI) for durable hard surfaces: concrete, brick, stone. Soft washing is low-pressure (~500 PSI) plus a biocidal cleaning solution for softer surfaces: siding, stucco, painted wood. Soft-wash kills algae, mildew, and bacteria; pressure-wash mostly removes dirt mechanically. The right tool for the surface. Both are necessary.
It can. That's why we soft-wash siding (vinyl, fiber-cement, stucco, painted wood) instead. Soft-wash uses much lower pressure plus a biocidal cleaning solution that does the work chemically rather than mechanically.
Yes, pre-paint prep is one of our most common requests. We'll wash, dry, and (optionally) lightly scuff the surface so primer and paint adhere properly.
Get your free quote in 30 seconds.
Get Instant QuoteOr call anytime: 303-990-2878