Hard-water stain removal is restoration, not cleaning, and in Beverly Hills it is one of the most-requested things we do. Beverly Hills draws Metropolitan Water District supply purchased by the City of Beverly Hills, and every drop of that water that dries on glass leaves dissolved calcium and magnesium behind. Washing does not dissolve carbonate. That is why the same spots survive repeated cleanings and why homeowners conclude the glass is simply ruined. Usually it is not.
Quick answer
Hard water stains can be removed if treated within ~6 months. Older stains may have etched the glass and require professional cerium oxide polishing.
The checklist is the same everywhere. What is on your glass is not. These are the conditions that actually shape this job in Beverly Hills. Each one is true here and false in plenty of other towns we serve.
Beverly Hills is on Metropolitan Water District supply purchased by the City of Beverly Hills. Colorado River Aqueduct water arrives at roughly sixteen grains per gallon after evaporating its way across two hundred and forty miles of open aqueduct, which puts it at the hard end of "very hard" by any standard. Every sprinkler pass that clips a pane, every hose rinse, every window washed and left to air-dry in the sun leaves that mineral behind. Combine it with seven months a year of no rain and you get the defining Beverly Hills glass problem: not dirt, but a bonded carbonate film that washing does not touch.
Rank the causes of permanent glass damage across Greater Los Angeles and irrigation overspray is at the top by a wide margin, ahead of dust, smog, and salt. The mechanism is simple and relentless: a head clips a ground-floor pane, the mineral-loaded water sheets down the glass, the sun evaporates it within minutes, and the calcium stays. Repeat that three mornings a week for four years and the deposit stops being a film and starts being etching. What makes it a Beverly Hills problem specifically rather than a general one is that irrigation runs here year round and there is no rain for over half the year to dilute it. Before we leave a job we walk the beds and point out exactly which heads are hitting glass. Moving one head is a ten-minute fix that saves years of restoration cost, and we would rather tell you that than put you on an annual restoration schedule.
Mineral deposits sit on the glass surface at first and can be lifted completely. Left in place, calcium carbonate slowly etches into the silica itself, and at that point no chemistry brings it back. The surface is physically pitted. As a rough rule, deposits under about five years old restore fully, deposits past that improve substantially but not perfectly, and deposits allowed to build for a decade in high-UV sun are usually permanent. We test an inconspicuous section in Beverly Hills homes before quoting, and we tell you which category you are in rather than taking the money and hoping.
Beverly Hills has a lot of custom and view-oriented homes, two-story window walls, clerestories, and big fixed panes aimed at whatever the lot was bought for, frequently on a slope with nowhere level to set a ladder. Those are the windows the owner cares about and the ones most often skipped, because reaching them safely takes planning and equipment. We work out access before quoting and list those panes as their own line item, so the cost of the view is visible rather than buried in a per-window average that either overcharges the easy glass or quietly leaves the hard glass dirty.
Diagnostic, we evaluate the staining to determine fresh-deposit vs. etched. Fresh deposits sit on the surface and feel slightly raised; etched glass is permanently roughened.
Chemical treatment for fresh deposits, acidic dissolver applied with controlled dwell time, then thoroughly rinsed. This works on stains < 6 months old.
Cerium oxide polishing for older deposits or light etching, graduated polishing pads with cerium oxide compound, machine-applied. This is slow, careful work, about 5-10 minutes per pane.
Severe-etching diagnosis, for glass that's been etched > 1 year, we honestly tell you whether polishing will work or whether replacement is more cost-effective. We'd rather tell you to replace one window than waste 4 hours of your money on glass we can't restore.
Sprinkler-overspray prevention recommendations: every job ends with practical advice on how to prevent recurrence: sprinkler-head adjustment, deflector caps, scheduled rinse-down with deionized water.
Tech walks the property, photographs every affected window, and rates each pane fresh / older / etched / unrecoverable. Customer sees the assessment in writing.
Hydrofluoric-substitute acidic dissolver applied carefully: controlled dwell time, neutralizing rinse, full water rinse. Repeated up to 3 times per pane if needed.
Graduated polishing pads (1500, 2000, 3000 grit) with cerium oxide compound. Slow, careful work. Restores gloss to the glass surface.
Standard window clean to remove all polishing residue. Final inspection from inside and out, with photos of before/after.
Recommendation on sprinkler adjustments, future cleaning frequency, and any glass that needs replacement rather than restoration.
Most Beverly Hills properties land between $230 and $805 for this service. That band is derived from real Beverly Hills jobs, not a national average, which is why it differs from the number you would see on our page for a neighboring town. Here is how the job profiles break down:
Want the exact number for your address? Get an instant quote in 30 seconds , no callback and no in-home estimate.
Storefront and mid-rise commercial glass on route schedules. Street-level glass needs a shorter interval than anything residential in the city.
Steep lots, mature sycamore and oak, and afternoon shade that keeps organic growth alive on north elevations longer than the rest of the city.
Wide streets, mature jacaranda and large period-revival houses. Honeydew and hard-water spotting are the two recurring issues and they need opposite timing.
Mid-century and contemporary with sweeping downslope glass. Access is the whole job here; the panes worth cleaning are the ones with no ladder position.
Canyon lots above Sunset with hard access and real Santa Ana funneling. Also genuine wildland interface, so smoke residue is a factor in some years.
Long driveways, hillside builds and heavy canopy. Leaf and seed load in the tracks is higher here than anywhere else in the city.
See every neighborhood and the full local guide on our Beverly Hills window cleaning page.
Denver Water averages 50-80 ppm hardness with high alkalinity (pH ~8). The alkalinity is what etches glass, alkaline water dissolves silica faster than acidic water of the same hardness. Combined with 300+ days of sun, mineral deposits get baked into the surface.
Colorado Springs Utilities water averages 100-150 ppm hardness, about 2× Denver's. Hard water staining there sets in faster, especially on south-facing windows hit by sprinkler overspray.
Aurora Water is the hardest of the major Front Range suppliers (~120 ppm avg), which is why Aurora homes near lawn irrigation often have the worst hard-water staining we see.
Etching is permanent. The mineral deposits eat into the silica matrix of the glass and create microscopic pitting that scatters light. Once a window is etched (typically after 12+ months of untreated mineral exposure), no amount of polishing can fully restore it, only replacement will.
Most of the time they come off. If the deposit is surface-bonded, generally under about five years of buildup, a controlled acidic restoration removes it completely and the glass returns to clear. Once the carbonate has etched into the silica, restoration improves the appearance but cannot make it perfect, and the honest options become glass polishing or replacement. We test before quoting so you know which one you have before you spend anything.
It is priced by the affected window rather than by the house, because usually only some elevations are affected. Light spotting is at the low end; multi-season buildup on a sprinkler-facing elevation is at the high end. We quote it separately from the wash so you can see exactly what the restoration portion costs and decide window by window.
Yes, if caught within ~6 months. Fresh deposits dissolve with the right acidic chemistry. Stains older than 12 months may have etched into the glass; cerium oxide polish can restore gloss for moderate etching, but severe etching is permanent.
Run your fingernail across the cloudy area. Fresh deposits feel slightly raised; etched glass feels smoother than the surrounding clear glass. If you can see the cloudy area is below the rest of the surface (a slight depression), that's etching.
$50–$200 add-on to standard window cleaning for moderate staining. Severe etching requiring cerium oxide polish runs $30-$60 per pane. Whole-home severe-etching jobs range $400-$800+.
Sometimes, for very fresh stains less than 3 months old. Spray undiluted white vinegar, let it sit 5-10 minutes, scrub with a non-abrasive pad, rinse. For older or heavier deposits, you need a commercial mineral deposit remover or professional service.
Get your free quote in 30 seconds.
Get Instant QuoteOr call anytime: 303-990-2878