Cedar Park is supplied by Lake Travis water via the Brushy Creek Regional Utility Authority, which is soft, so hard-water staining is genuinely less common here than in the Denver Basin communities or across New Mexico. When we do find it in Cedar Park, the source is almost always a specific one: a well-fed irrigation system, a neighbor's overspray, a water feature, or a pressure-washer left to dry on the glass. Diagnosing the source matters as much as removing the deposit, because otherwise it comes right back.
Before you book: Cedar Park is on Lake Travis water via the Brushy Creek Regional Utility Authority, which is soft. Plenty of Cedar Park homes never need hard-water restoration at all, and we would rather say that than sell it. When we do find mineral staining here it usually has a specific local source: a well-fed irrigation line, a neighbor's overspray, a water feature, or a hose rinse left to dry in the sun. Finding that source matters as much as removing the deposit.
Quick answer
Hard water stains can be removed if treated within ~6 months. Older stains may have etched the glass and require professional cerium oxide polishing.
The checklist is the same everywhere. What is on your glass is not. These are the conditions that actually shape this job in Cedar Park. Each one is true here and false in plenty of other towns we serve.
Mineral deposits sit on the glass surface at first and can be lifted completely. Left in place, calcium carbonate slowly etches into the silica itself, and at that point no chemistry brings it back. The surface is physically pitted. As a rough rule, deposits under about five years old restore fully, deposits past that improve substantially but not perfectly, and deposits allowed to build for a decade in high-UV sun are usually permanent. We test an inconspicuous section in Cedar Park homes before quoting, and we tell you which category you are in rather than taking the money and hoping.
Cedar Park has a lot of custom and view-oriented homes, two-story window walls, clerestories, and big fixed panes aimed at whatever the lot was bought for, frequently on a slope with nowhere level to set a ladder. Those are the windows the owner cares about and the ones most often skipped, because reaching them safely takes planning and equipment. We work out access before quoting and list those panes as their own line item, so the cost of the view is visible rather than buried in a per-window average that either overcharges the easy glass or quietly leaves the hard glass dirty.
Diagnostic, we evaluate the staining to determine fresh-deposit vs. etched. Fresh deposits sit on the surface and feel slightly raised; etched glass is permanently roughened.
Chemical treatment for fresh deposits, acidic dissolver applied with controlled dwell time, then thoroughly rinsed. This works on stains < 6 months old.
Cerium oxide polishing for older deposits or light etching, graduated polishing pads with cerium oxide compound, machine-applied. This is slow, careful work, about 5-10 minutes per pane.
Severe-etching diagnosis, for glass that's been etched > 1 year, we honestly tell you whether polishing will work or whether replacement is more cost-effective. We'd rather tell you to replace one window than waste 4 hours of your money on glass we can't restore.
Sprinkler-overspray prevention recommendations: every job ends with practical advice on how to prevent recurrence: sprinkler-head adjustment, deflector caps, scheduled rinse-down with deionized water.
Tech walks the property, photographs every affected window, and rates each pane fresh / older / etched / unrecoverable. Customer sees the assessment in writing.
Hydrofluoric-substitute acidic dissolver applied carefully: controlled dwell time, neutralizing rinse, full water rinse. Repeated up to 3 times per pane if needed.
Graduated polishing pads (1500, 2000, 3000 grit) with cerium oxide compound. Slow, careful work. Restores gloss to the glass surface.
Standard window clean to remove all polishing residue. Final inspection from inside and out, with photos of before/after.
Recommendation on sprinkler adjustments, future cleaning frequency, and any glass that needs replacement rather than restoration.
Every Cedar Park property is priced individually from your home's square footage, window count, stories, and access, using real completed Cedar Park jobs, not a national average. The fastest way to know your number is to get it directly:
Get your quote here:
Get Your Instant QuoteExact, bookable price for your address in 30 seconds. No callback and no in-home estimate.
Greenbelt lots against the juniper; December pollen lands here first.
Mature 1980s-90s stock, original aluminum tracks that need dry detail before water.
Central Cedar Park two-stories with the signature over-the-door entry glass.
Newer builds at the canyon edge — construction fines plus juniper duff in the same tracks.
The established canopy neighborhood — March oak drop, spring honeydew, and karst caves literally beneath the streets.
Golf-course homes with big back walls of glass facing the fairways and the afternoon sun.
See every neighborhood and the full local guide on our Cedar Park window cleaning page.
Denver Water averages 50-80 ppm hardness with high alkalinity (pH ~8). The alkalinity is what etches glass, alkaline water dissolves silica faster than acidic water of the same hardness. Combined with 300+ days of sun, mineral deposits get baked into the surface.
Colorado Springs Utilities water averages 100-150 ppm hardness, about 2× Denver's. Hard water staining there sets in faster, especially on south-facing windows hit by sprinkler overspray.
Aurora Water is the hardest of the major Front Range suppliers (~120 ppm avg), which is why Aurora homes near lawn irrigation often have the worst hard-water staining we see.
Etching is permanent. The mineral deposits eat into the silica matrix of the glass and create microscopic pitting that scatters light. Once a window is etched (typically after 12+ months of untreated mineral exposure), no amount of polishing can fully restore it, only replacement will.
Most of the time they come off. If the deposit is surface-bonded, generally under about five years of buildup, a controlled acidic restoration removes it completely and the glass returns to clear. Once the carbonate has etched into the silica, restoration improves the appearance but cannot make it perfect, and the honest options become glass polishing or replacement. We test before quoting so you know which one you have before you spend anything.
It is priced by the affected window rather than by the house, because usually only some elevations are affected. Light spotting is at the low end; multi-season buildup on a sprinkler-facing elevation is at the high end. We quote it separately from the wash so you can see exactly what the restoration portion costs and decide window by window.
Yes, if caught within ~6 months. Fresh deposits dissolve with the right acidic chemistry. Stains older than 12 months may have etched into the glass; cerium oxide polish can restore gloss for moderate etching, but severe etching is permanent.
Run your fingernail across the cloudy area. Fresh deposits feel slightly raised; etched glass feels smoother than the surrounding clear glass. If you can see the cloudy area is below the rest of the surface (a slight depression), that's etching.
Hard-water removal is an add-on to standard window cleaning, priced by the affected window because usually only some elevations are hit. Light spotting costs less than multi-season buildup, and severe etching that needs cerium oxide polish is priced per pane. You get the exact number before we start.
Sometimes, for very fresh stains less than 3 months old. Spray undiluted white vinegar, let it sit 5-10 minutes, scrub with a non-abrasive pad, rinse. For older or heavier deposits, you need a commercial mineral deposit remover or professional service.
Get your free quote in 30 seconds.
Get Instant QuoteOr call anytime: 303-990-2878