Pressure washing in Bernalillo is for hard surfaces — driveways, walks, patios, and hardscape — and it is deliberately not for everything. In a market with this much stucco and adobe, the most important thing a pressure washing company can tell you is where NOT to use pressure. Driving water into a stucco wall or an adobe surface causes damage that costs far more than the cleaning, and those surfaces need soft washing instead.
Quick answer
Pressure washing uses high-pressure water (~3,000 PSI) to remove dirt, mildew, and stains from durable hard surfaces.
The checklist is the same everywhere. What is on your glass is not. These are the conditions that actually shape this job in Bernalillo — each one is true here and false in plenty of other towns we serve.
This is the single most common way exterior cleaning damages a Bernalillo home. Stucco is porous and adobe more so, and a pressure washer drives water into the wall assembly where it has nowhere to go. The damage shows up later as blistering, spalling, and staining that looks like a moisture problem because it is one. Hardscape takes pressure. Walls take a low-pressure soft wash with the chemistry doing the work. Any company willing to put a pressure wand on your stucco is telling you something about how they will treat the rest of the job.
The chalky white haze that appears on Bernalillo concrete, brick, and pavers is efflorescence — dissolved salts carried to the surface by moisture moving through the material, left behind when the water evaporates. Hard water and heavy irrigation both accelerate it. Pressure alone does not remove it and often just wets it back into the surface. It needs the right chemistry, applied for a controlled dwell, then rinsed. Knowing the difference between efflorescence and ordinary soiling is most of what separates a good result from a wasted afternoon.
Hard-surface pressure washing — concrete driveways, sidewalks, brick or stone patios, stamped concrete, paver walkways. ~3,000 PSI hot-water pressure removes oil stains, ground-in dirt, and biological growth.
Soft-wash service — for siding, stucco, painted wood, and any surface that won't survive high pressure. ~500 PSI with a biocidal cleaning solution.
Composite/wood deck cleaning — different solution and pressure for each material; we won't blast away the protective finish.
Fence cleaning — wood, vinyl, or composite. Pre-paint prep is a common request.
Garage floor degreasing — hot-water pressure plus an oil-cutting detergent.
Enter your address. Our autoquoter sizes the property and returns a pressure-wash price. We'll confirm the surfaces and any add-ons when scheduling.
Lead tech identifies what's pressure vs. soft-wash, flags any surfaces we won't touch (brick mortar in poor condition, peeling paint), and sets up appropriate plant/landscaping protection.
Surface-appropriate biocide for soft-wash; degreaser for hard-surface oil stains. Dwell time per the chemistry — we don't rush.
Hot-water pressure for hard surfaces. Soft-wash applicator for siding/stucco. Always work top-down to prevent streak lines.
Final low-pressure rinse to remove any remaining solution. Plants/lawn rinsed clean. Photos emailed showing before/after.
Most Bernalillo properties land between $210 and $560 for this service. That band is derived from real Bernalillo jobs, not a national average — which is why it differs from the number you would see on our page for a neighboring town. Here is how the job profiles break down:
Want the exact number for your address? Get an instant quote in 30 seconds — no callback and no in-home estimate.
Cottonwood cotton in June and leaf litter in autumn; organic debris rather than mineral is the main problem on this side of town.
Toward the pueblo boundary and the casino corridor; open exposure and large commercial glass.
Production housing with two-story gable-end glass and roof-mounted coolers — the classic vertical streaking pattern.
Old adobe with original glass and lime plaster reveals; hand cleaning only, no poles and no pressure.
Newer stucco construction on open ground with mesa exposure and highway dust; the dustiest glass in town.
Commercial, hospitality, and retail glass on the main route to the Jemez and Farmington — heavy truck traffic and constant road film.
See every neighborhood and the full local guide on our Bernalillo window cleaning page.
Colorado's freeze-thaw cycles work biological growth (algae, mildew) deep into porous surfaces like concrete and brick. Annual pressure washing is the practical maintenance interval; longer than that and you start losing surface integrity.
Front Range water hardness leaves mineral deposits on hardscape that look like permanent staining. Hot-water pressure with a mild acidic surfactant clears these where cold-water blasting won't.
Hail country (Boulder, Fort Collins, Loveland) — after major hail, dimpled siding and damaged shingles drop debris on patios that's easier to remove pressure-washed than left to weather.
We will clean it, but not with pressure. Stucco and adobe are porous, and a pressure washer drives water into the wall where it causes blistering, spalling, and staining months later. Those surfaces get a low-pressure soft wash where the cleaning solution does the work. We reserve actual pressure for driveways, walks, and hardscape.
Spring is the highest-value time in Bernalillo, once overnight temperatures stay above freezing. It clears the winter's accumulated road chemicals and grime before the freeze-thaw season finishes working on the concrete.
Most Denver homes run $300–$800. A typical driveway + sidewalk + porch combo is $300–$450. Full house siding (soft-wash) is $400–$700. Whole-property bundles (driveway + house + deck + fence) run $700–$1,500.
Pressure washing is high-pressure water (~3,000 PSI) for durable hard surfaces — concrete, brick, stone. Soft washing is low-pressure (~500 PSI) plus a biocidal cleaning solution for softer surfaces — siding, stucco, painted wood. Soft-wash kills algae, mildew, and bacteria; pressure-wash mostly removes dirt mechanically. The right tool for the surface — both are necessary.
It can — that's why we soft-wash siding (vinyl, fiber-cement, stucco, painted wood) instead. Soft-wash uses much lower pressure plus a biocidal cleaning solution that does the work chemically rather than mechanically.
Yes — pre-paint prep is one of our most common requests. We'll wash, dry, and (optionally) lightly scuff the surface so primer and paint adhere properly.
Get your free quote in 30 seconds.
Get Instant QuoteOr call anytime: 303-990-2878
